Get Dressed For Battle (GDFB)
£60.31
£80.41
Stock: 28 un.
Robe a two-tone Crusaders. For those crusaders who were not with one of the military orders, as the Templars or Hospitallers, who had garments distinctive, this tunic would have served you well. It is a tunic made of...
£51.05
£68.06
Stock: 20 un.
Round shield of steel with a lining riveted on the front of brown leather. A buckler is a shield small, more or less as a kitchen plate, which was used as a weapon during the Medieval era and the Renaissance. The...
Gorjal hood and padded ideal to put under the helmet or the executioners of mesh. Front fastening with leather straps and metal buckles. The product is made of cotton and stuffed with wool. Available in various sizes...
£43.75
£58.33
Stock: 17 un.
Head of the halberd Sempach with a design based on the halberds used during the FOURTEENTH century. It is manufactured in mild steel (low carbon). Features:
Outer diameter: 33 cm
Inner diameter: 11 cm
£32.72
£43.63
Stock: 17 un.
Shims medieval crafted in wool with a design inspired by the models used during the century XIII and XIV. It is used to carry along some shorts and ,if it was hot, they could wind up down.
£40.90
£54.53
Stock: 12 un.
Doublet medieval men with a design inspired by the models used during the FIFTEENTH century. It is crafted in wool with lining of linen.
£43.75
£58.33
Stock: 10 un.
Head of the Halberd German, XIV century, crafted in mild steel (low carbon). Features:
Outer diameter: 50 cm
Inside diameter 7,5 cm
£51.05
£68.06
Stock: 10 un.
Head of the halberd of the battle, with a design based on the halberds used during the FIFTEENTH century. It is manufactured in mild steel (low carbon). Features:Outer diameter: 50 cmInner diameter: 7,5 cm
£82.26
£109.68
Stock: 10 un.
Barbuta Corintian with the form of 'And' made of steel with a thickness of 2 mm (14 gauges). The hull is composed of two plate metal welded together, and then has given the helmet a polished finish. Includes...
£61.80
£82.40
Stock: 10 un.
Shield Battle Ready model Fechtbuch made of steel with a thickness of 2 mm (16 gauge). Buckler of a Thalhoffer Fechtbuch written by Hans Thalhoffer (1420-1490), a master swordsman and a master of duels. This shield is...
£23.25
£31.00
Stock: 9 un.
Gorjal medieval leather with a design insiprado in the models used during the FIFTEENTH century. The gorjal offers protection to the neck and to the shoulders of the warrior. Our gorjal it is made of hard leather with...
£46.58
£62.11
Stock: 9 un.
Pauldrons of a knight with a design inspired by the medieval knights of the FOURTEENTH century. Are made of plates of mild steel, with little content of carbon, with a thickness of 1.6 mm Are adjusted with the leather...
£76.77
£102.36
Stock: 9 un.
Helmet type Kettle with a design inspired by the models used during the century. This helmet has a small crest and a wing width that was meant to keep the arrows coming from above. Made of two parts of steel of 1.6 mm...
£14.50
£19.33
Stock: 9 un.
Breeches medieval Braies made in cotton 100%. Indispensable item for any recreacionista. Used in conjunction with shims. One size fits all.
£82.26
£109.68
Stock: 8 un.
Baciente Goalkeeper Battleready. Made of two plates welded mild steel, 2 mm (14 gauges) thick. The helmet has a polished finish. Includes a barbuquejo leather and a leather lining adjustable and riveted to the hull.
£14.53
£19.37
Stock: 8 un.
Mallet head made in mild steel and with a finish of skewers with blunt tip. Features:
Inner diameter: 2.5 cm
Outer diameter: 3,5 cm
£51.05
£68.06
Stock: 8 un.
Shield, Diamond-shaped Battle Ready model Fechtbuch made of steel with a thickness of 2 mm (16 gauge). Buckler of a Thalhoffer Fechtbuch written by Hans Thalhoffer (1420-1490), a master swordsman and a master of...
£46.58
£62.10
Stock: 8 un.
Jacket arm type gambesón. The jackets put together were a dress extremely common in the medieval warrior of the XIV and XV centuries. A shorter form of gambesón, could be used both over a shirt of mesh as below. They...
£22.76
£30.35
Stock: 8 un.
Tunic medieval with piping in the neck and the sleeves. It is a tunic, short-sleeved made in cotton 100%. Available in various sizes. You can serve it with a leather belt to complete a look that's medieval simple.
£51.05
£68.06
Stock: 6 un.
Head of the halberd Switzerland with a design based on the halberds used during the SIXTEENTH century. It is manufactured in mild steel (low carbon). Features:Outer diameter: 24 cmInner diameter: 51 cm
£40.76
£54.34
Stock: 6 un.
Cap medieval ready for the BattleReady with a design inspired by the caps Europe from the XIV century. Made of two halves welded steel 2 mm (14 gauge), this helmet presents a smooth surface, leather lining-style...
£98.73
£131.64
Stock: 6 un.
Helmet type Sallet of origin Milanese with a design inspired by those used during the FIFTEENTH century in the North of Italy. It is equipped with a visor of bellows and protective neck laminate. Made of two halves...
£36.44
£48.59
Stock: 6 un.
Head axe German gift design inspired by the axe used in the FIFTEENTH century. The head is produced in mild steel (low carbon). Does not include the handle of wood. Traits:
Inner diameter: 20 cm
Outside diameter: 20 cm
£71.29
£95.05
Stock: 6 un.
Shoulder of a gentleman in Milan with a design inspired by the knights of the north of Italy of the FIFTEENTH century. Are made of plates of mild steel, with little content of carbon, with a thickness of 1.6 mm Are...
£43.75
£58.33
Stock: 5 un.
Shield of riveted steel ideal for Battle Ready. A buckler is a small shield, more or less as a kitchen plate, which was used as a weapon during the Medieval era and the Renaissance. The diameter is 30 cm, The handle...
£71.28
£95.04
Stock: 5 un.
The gauntlets are articulated to the Knights Milanéses. These are part of the armor milanese, are articulated and completely functional. They are made of a plate 1.6 mm (16 gauge) mild steel (low carbon content). They...
£61.80
£82.40
Stock: 5 un.
Mallet head of Lucerne, of the S. XV. This hammer bears the name of Lucerne, because many of these weapons of the XV century, forged in Lucerne, Switzerland. Has a head of eight points, apparently, to pierce an armor...
£68.54
£91.38
Stock: 5 un.
Helmet type Kettle with a design inspired by the models used at the end of the FIFTEENTH century. This helmet has a small crest and a wing width that was meant to keep the arrows coming from above. Made of two parts...
£51.05
£68.06
Stock: 4 un.
Round shield of steel with a lining riveted on the front of leather. A buckler is a small shield, more or less as a kitchen plate, which was used as a weapon during the Medieval era and the Renaissance. The diameter...
Great helmet Templar with a design inspired by the helmet of Sir Richard Pembridge, who died in 1375. The source is now in the collection of the Museum of Scotland, Edinburgh. The crosses at the bottom of the hull in...
£76.77
£102.36
Stock: 4 un.
Gambesón medieval with a design inspired by the models used during the THIRTEENTH century. Our gambesones are made with a fleece inner and a the outer part of the cotton to the 100%. Are padded with Cloaks of wool...
£96.41
£128.55
Stock: 4 un.
Gambesón Goalkeeper with a design inspired by the models used in the late FOURTEENTH century and early FIFTEENTH century. Our gambesones are made with a cotton lining the 100%. Are padded with Cloaks of wool blankets....
£63.59
£84.79
Stock: 4 un.
The helmet Sutton Hoo original was found in the year 1939 while making excavations near Woodbridge, Suffolk, England. Historically it is similar to the helmets Germanic or Valgrade or Spathas (Sweden). It is thought...
£34.91
£46.55
Stock: 4 un.
Vest medieval lace-up and with a design inspired by the models used in the FIFTEENTH century. The vest was a very important part of a man's wardrobe. Made of wool, (minimum content of wool 85% guaranteed) lining 100%...
£20.04
£26.72
Stock: 4 un.
Tunic medieval with piping in the neck and the sleeves. It is a tunic, long sleeve elabrada in cotton 100%. Available in various sizes. You can serve it with a leather belt to complete a look that's medieval simple.
£15.75
£21.00
Stock: 4 un.
Shirt medieval high neck with button fastening. Made in 100% pure cotton hand-woven. The shirt serves as a pledge of the basis for many sets of time. Available in 2 colours.
Tip of arrow-straight model I made in mild steel. Features:Diameter hole: 8,5 mmThe long part where you enter the stick: 36,25 mm
Arrowhead curve model I made in mild steel.
Arrowhead Saxon made in mild steel. Features:Diameter of hole: 6.5 mm.The long part where you enter the stick: 19 mm
Arrowhead Chippenham type 3 made in mild steel. Features:Diameter of hole: 6 mmThe long part where you enter the stick: 20 mm
Arrowhead Saxon II made in mild steel. Features:Diameter of hole: 6.5 mm.The long part where you enter the stick: 19 mm
Arrowhead Chippenham type 1 made in mild steel. Features:Diameter hole: 7 mmThe long part where it enters the rod: 26 mm
Hull of the Crusaders based on the Bible of Maciejowski. This elegant mirror would help to complete any outfit crossed. The crest of the eye and middle are reinforced with steel bands and decorative. Built in steel of...
Medieval helmet orginado in the Mediterranean area in the TWELFTH century. It was used by the soldiers in Sicily who were descendants of pilgrims normans, that is ivan, or returning from the Holy Land. Our version is...
£179.00
£238.67
Stock: 3 un.
Peto medieval model Churburg. The shell is a part of the armor that protects the upper area of the chest of the warrior. It is hand-made in steel with a thickness of 1.6 mm (16 gauge). Is built to withstand the...
£79.52
£106.03
Stock: 3 un.
Helmet Sallet Archer used in the second half of the FIFTEENTH century. Reproduction of the Walters Art Museum, Italy. This helmet was favored by archers, which required a vision intact to aim effectively with their...
Gambesón Goalkeeper with a design inspired by the models used in the late FOURTEENTH century and early FIFTEENTH century. Our gambesones are made with a cotton lining the 100%. Are padded with Cloaks of wool blankets....
£118.29
£157.72
Stock: 3 un.
Legs Knight of Churburg that form part of the set, Armour of Churburg. These pieces cover the top of the legs. They are produced in mild steel, with little content of carbon and have a thickness of 1.6 mm and the part...
Showing 1-48 of 154 item(s)
